LCS² cable management & wiring accessories

The network at your hand

Zone distribution boxes of LCS2 consolidate and redistribute with complete ease

With the new LCS 2 zone distribution boxes connected to the Mosaic or Arteor feedthrough sockets, the result is complete flexibility. The connections close to the workstation are centralised, copper and fibre optic are in a single box, etc. and the LCS 2 performances are guaranteed.

  • AREA DISTRIBUTION BOXES FOR VDI NETWORK

    Used as a consolidation point between the rack and the RJ 45 sockets, as required by ISO 11801. Enable ELV distribution in Cat. 6 STP/FTP/UTP and Cat. 5e FTP cabling over an area containing 1 to 12 RJ 45 sockets. 
    The centralisation of connections close to their point of use provides flexibility and upgradability for the installation. It is possible to leave lines unused in the area distribution box to rapidly respond to future user needs. Can be installed in false ceilings or technical floors. Connectable to the patch panel or floor cabinet.
    Polycarbonate cover and polypropylene base.
    Tightness protection index: IP 21.
    Protection against mechanical impacts: IK 07.

    Available in pre-equipped or equippable versions with 4x RJ 45 connector blocks. UTP, FTP, STP or SFTP connectors can be used as required. 8 or 12 RJ 45 connectors as per requirements (the 8-connector version also enables configuration with up to 12 links, replacing the blanking plate with a 4-connector block). Lay-out of the area distribution boxes using AutoCAD and Legrand fast connection software.

  • CONNECTING RJ 45 SOCKETS TO THE BOX

    RJ 45 sockets are connected to the area distribution box using a mixed cord, equipped with an RJ 45 plug on one end to connect it to the box and bare on the other end to fit it to the LCS connector on the RJ 45 socket or an RJ 45-RJ 45 cord to connect to a copper feed-through RJ 45 socket.

  • MOSAIC RJ 45 SOCKETS

    Enable network access whatever the needs:
    10 Gb, Cat. 6, Cat. 5, STP or FTP. 
    Equipped with IDC connectors.
    Possible to re-cable in the event of error. Available in standard version and with copper feed-through. Installation possible in shallow trunking system, 35 mm for UTP and FTP connectors, 50 mm for STP.
    Mosaic RJ 45 sockets can take either RJ 45, RJ 12 or RJ 11 plugs without deformation of contacts. 
    They fit all installation supports in the Mosaic programme perfectly (floor boxes, columns, trunking systems, etc.).

  • RJ 45 SWITCHES AND DISTRIBUTORS

    Available as boxes to be inserted in the patch panel (5 or 8 RJ 45 STP ports) or in flush-mounting format (manageable or not).

  • WIFI MOSAIC ACCESS POINTS

    Enable any computer equipped with a WiFi external or WiFi compatible built-in standard (Intel Centrino) card to access the Ethernet network without a cable connection to an RJ 45 socket.
    Can be installed at any point in the building and in all Mosaic installation supports (4- module size), offering a 54 Mbit/s rate.
    Application examples: Exchanging data with other computers, accessing the Internet or using a network printer.
    WiFi Mosaic access points are delivered with a configuration CD-Rom to ensure secure network access.

    3 WiFi access points are available:
    - Type a + b/g with RJ 45 socket, compliant with 802.11a and 802.11b/g dual band standards. Enables a permanent physical connection for a computer and wireless access to the network for nomadic users.
    - Type a + b/g, compliant with 802.11a and 802.11b/g standards. Enables network access from any point in the building at any time.
    - Type b/g, compliant with 802.11b/g standard. Enables network access mainly for visitors, for example.