Industrial contactors: CTX

CTX

industrial contactors up to 310 A

The new range of CTX industrial contactors provides safe and effective control, monitoring and protection of circuits. It can be used for electricity distribution applications for both commercial and industrial buildings.

  • THREE

    CTX-1 THREE-POLE CONTACTORS FOR INDUSTRIAL USE

    • - From 9 A to 105 A – AC3

    • - Control voltage from 24 V~ to 400 V~

    • - Dual frequency coils 50/60 Hz with 3 terminals for easier wiring and tap-off

    • - Front and side mounting auxiliary contact blocks

      • . Up to 4 blocks for 9 A to 40 A ratings

      • . Up to 6 blocks for 50 A to 105 A ratings

    • - Can be equipped with RTX-1 thermal relays

    • - DIN-rail mounting

    • - Mechanical interlocking accessories

  • CONTACTORS

    CTX-2 THREE-POLE CONTACTORS FOR INDUSTRIAL USE

    • - From 150 A to 310 A – AC3

    • - Control voltage from 24 V~ to 400 V~

    • - Dual frequency coils 50/60 Hz with 3 terminals for easier wiring and tap-off or

    • - AC/DC electronic control from 24 V~/= to 415 V~/=

    • - Side mounting auxiliary contact blocks

      • .Up to 8 blocks per contactor

    • - Can be equipped with RTX-2 thermal relays

    • - Mechanical interlocking accessories

  • THERMAL

    RTX-1 AND RTX-2 THERMAL RELAYS

    • - For CTX-1 and CTX-2 industrial contactors

    • - For protection against normal and balanced overloads and long starting times

    • - Fix directely onto contactor or on DIN rail

    • - Various opreating modes (manual, automatic, manual or automatic reset with stop)

    • - Test button and tripping indicator

  • CAPACITOR

    CTX-C SPECIAL CONTACTORS FOR CAPACITOR BANKS

    • - Three-pole contactors for 12.5 kVAR to 70 kVAR capacitor banks

    • - Control voltage: 110 V~, 230 V~ and 400 V~

    • - Dual frequency coils 50/60 Hz with 3 terminals for easier wiring and tap-off

    • - Equipped with auxiliary contact and discharge resistors for connecting three-phase capacitor banks